This is a project (Open Source) created by Roberto in Garage Fab Lab in 2015, Sao Paulo, Brazil.
The Roberto Stelzer's Coobot is licensed under a Creative Commons License - Attribution-NonCommercial-CompartilhaIgual 4.0 International.
Based on work available in http://cooboteditor.blogspot.com.br/.
There may be additional permits to those granted under this license in http://cooboteditor.blogspot.com.br/.
ATTENTION!
Need a laser cut machine.
You will need to go to a Fab Lab or other place where you can use a laser cutter.
To make the cut you will need to download the file in the format ".dxf" or compatible with the cut machine that will use.
List of materials:
MDF plate 3 of about 500 mm x 250 mm
1 meter of threaded rod 3/16 inch (approx. 4.7 mm)
16 nuts for threaded 3/16 inch
24 washers for thread 3/16
13 washers for thread 3/16
White glue
1 wing nut (optional for the top of the head)
bow saw to cut the threaded rod
file or emery to give finish to the cut ends of the threaded rods
To download the cut plan in .dxf click here.
Instrucitons
Nenhum comentário:
Postar um comentário